PcComponentes
Mon compte
Découvre les offres des Rentrée Scolaire

StarTech.com Carte Contrôleur RAID PCI Express 2.0 SATA III 6Gbps à 4 ports avec HyperDuo SSD Tiering - Adaptateur Contrôleur PCIe SATA 3

3,2/5
21 Avis
Questions(1)
P/N: PEXSAT34RH | Cod. Article: 209987
103,99
Limité à une unité par commande
Découvre les offres des Rentrée Scolaire
103,99
Services disponibles
+27.99€
+17.98€
Garanties
Garantie de solution en 24h
Gratuit
+7.39€
103,99
Caractéristiques
Avis21
Questions et réponses1
Comparés
À propos du produit

Ajoutez 4 ports SATA III internes (6 Gb/s) à un ordinateur par le biais d'un slot PCI Express x2La carte contrôleur PCI Express 2.0 SATA 4 ports PEXSAT34RH avec HyperDuo ajoute 4 ports AHCI SATA III à un ordinateur par le biais d'un slot PCI-E (x2), permettant plusieurs connexions internes de 6 Gb/s pour des lecteurs de disque dur et à état solide (SSD) haute performance.Offrant la technologie HyperDuo, cette carte SATA permet la classification automatique par niveaux des SSD pour bénéficier de la performance du stockage sur SSD, ainsi que de l'aspect économique et de la grande capacité des disques durs standard. En combinant des disques SSD et des HDD en un seul volume (jusqu'à 3 SSD et 1 HDD), la fonction HyperDuo fonctionne discrètement en arrière-plan et déplace les fichiers à utilisation fréquente vers les disques SSD pour un débit de données amélioré - jusqu'à 80 % de la performance sur SSD ! (Remarque : La fonction de classification automatique du stockage par niveau HyperDuo est compatible avec les ordinateurs utilisant un BIOS.)La carte contrôleur PCI-E SATA prend en charge le multiplicateur de ports (MP), permettant ainsi de connecter jusqu'à 7 disques SATA sur un seul port et à l'aide d'un seul câble (jusqu'à 4 disques via MP sur un port, et un disque sur chacun des 3 ports restants). De plus, la carte contrôleur SATA offre une solution matérielle RAID efficace avec un support RAID (0, 1, 1+0) natif.[HTMLLINEBREAK]Test du débitConfiguration des disquesDébitTaille du disque1 HDD112,81 Mo/s2 To1 SSD490,28 Mo/s120 Go1 HDD + 1 SSD HyperDuo (Mode sans échec)489,28 Mo/s2 To1 HDD + 2 SSD HyperDuo (Mode sans échec)715,13 Mo/s2 ToDisques utilisés : [HTMLLINEBREAK]SSD : Série OCZ Vertex 3, 2,5 pouces, 120 Go (VTX3-25SAT3-120G)[HTMLLINEBREAK]HDD : Western Digital Caviar Green, 3,5 pouces, 2 To (WD20EARS)[HTMLLINEBREAK][HTMLLINEBREAK]Logiciel utilisé : [HTMLLINEBREAK]Appareil de mesure E/S, lecture séquentielle 256 Ko, profondeur de la file d'attente = 10Cette carte PCI-E SATA de 6 Gb/s bénéficie de la garantie StarTech.com de 2 ans et de l’assistance technique à vie gratuite.The StarTech.com Advantage

Spécifications:

  • Connectivité
    • Interfaces de lecteur de stockage prises en charge: SATA, Série ATA III
    • Interface de l'hôte: PCI Express
    • Version des emplacements PCI Express: 2.0
    • Quantité de ports internes SATA: 4
  • représentation / réalisation
    • Niveaux RAID: 0, 1, 10, JBOD
    • Taux de transfert des données: 6 Gbit/s
    • Support SSD: Oui
    • Jeu de composants: Marvell - 88SE9230
    • Support LBA (Logical block addressing): 48 bit
  • Détails techniques
    • Conformité à la durabilité: Oui
    • Certificats de durabilité: CE, RoHS
  • Configuration minimale du système
    • Prise en charge du système d'exploitation Windows: Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64, Windows 11, Windows 11 x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
    • Compatibilité Mac: Oui
    • Prise en charge du système d'exploitation Mac: Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
    • Prise en charge du système d'exploitation Linux: Oui
    • Prise en charge du système d'exploitation serveur: Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
  • Conditions environnementales
    • Température d'opération: 5 - 50 °C
    • Température hors fonctionnement: -25 - 70 °C
    • Humidité relative de fonctionnement (H-H): 20 - 80%
  • Poids et dimensions
    • Largeur: 120 mm
    • Profondeur: 70 mm
    • Hauteur: 20 mm
    • Poids: 49 g
    • Largeur du colis: 145 mm
    • Profondeur du colis: 175 mm
    • Hauteur du colis: 32 mm
    • Poids du paquet: 141 g
  • Données logistiques
    • Largeur du casier principal (externe): 381 mm
    • Longueur du casier principal (externe): 488 mm
    • Hauteur du casier principal (externe): 321 mm
    • Produit par casier principal (externe): 60 pièce(s)
    • Code du système harmonisé: 84733080
  • Autres caractéristiques
    • Manuel d'utilisation: Oui
    • Drivers inclus: Oui
    • Facteur de forme de la carte PCI: Hauteur totale (profil bas)
Date de sortie: 20/3/2013

Sécurité du produit

Avis

3.2
95%
On recommande
  • 5
    8
  • 4
    3
  • 3
    2
  • 2
    1
  • 1
    7

Donnez votre avis

Cela vous prendra une minute, vous aiderez les gens à prendre une décision.

Avis des utilisateurs

Total 20 avis
  • Plus pertinents
  • Plus récents
  • Plus anciens

En provenance d'autres pays

A
Anonimo6473
Avis le plus utile
Hace 5 años
Magnifique contrôleur. Je l'ai acheté en remplacement d'un ancien modèle du même fabricant. Les performances sont très bonnes et, bien que non comparables à un contrôleur haut de gamme. fonctionne parfaitement avec Linux. En fait, avec CentOS 8, vous n'avez pas besoin de pilotes supplémentaires. Il ...
Avantages
  • Il est compact et ne chauffe pas. Très bonnes performances pour un contrôleur de ce prix.
Traduit · 
L
Lukanus
Hace 5 años
J'ai demandé un retour car il n'est pas compatible avec un ordinateur DELL Optiplex 5060. Après avoir contacté le support du constructeur et suivi ses instructions pour effectuer différents tests, il n'a pas été possible de le faire fonctionner. Je coche l'option Non recommandé, mais je comprends qu...
Traduit · 
j
joseaaaa
Hace 16 días
en las placas z890 solo hay cuatro puertos sata y te permite ampliar
j
jmaeshawn
Hace 5 años
I purchased this card so that I could add 3 additional SATA hard disk drives to my PC, because my motherboard's 12 SATA ports are all being used. However, the card has caused me nothing but headaches. When I first installed the card, it appeared to be working fine because the hard drives all showe...
Publié originalement sur Startech
m
mxgirl75
Hace 6 años
I bought this card hoping to allow me to hook up a couple more SATA devices. The system a Win 7 64 bit does not even see the card
Publié originalement sur Startech
A
Andrey74
Hace 8 años
Disks connected to the card are unstable. Speed first 450 MB / s Then drops to 100 MB / s. Mac OS 10.12.3
Publié originalement sur Startech
F
Freek
Hace 5 años
I bought this as a replacement for a faulty SATA 2.0 controller. Works out of the box, although for some strange reason only after I booted the second time, examined the BIOS menu with ctrl-M, and figured I didn't need to change anything for JBOD mode. Overall seems good product. Only minor disadvan...
Publié originalement sur Startech
A
Adam2329
Hace 6 años
Hello, recently purchased. Spiceworks poster. Used this recently in a Gaming PC build, 2x 970 evo 512GB with 1x 6TB WD Blue = up to 800mbps throughput from or to NVME System drive. I had initial issues with conflicts but I eventually got the card and my system working. copied my existing HDD to i...
Publié originalement sur Startech
t
tbone
Hace 4 años
I had a bit of an ordeal installing this device and thought I would have to send the sata expansion card back, ALWAYS read reviews before you buy something unless you don't mind losing the cash. I found that the BIOS was registering all of the drives that were plugged in, the issue was when I boote...
Publié originalement sur Startech
j
jbolivarg
Hace 4 años
I bought this product around 3 years ago and it is working flawlessly. The HyperDuo function is wonderful and helps me to use a bigger HDD with high performance at one affordable price.
Publié originalement sur Startech
D
DISCOTHEQUE
Hace 8 años
Been using it for almost two years now and it's worked consistently good. Used it to connect an internal 4TB drive and my comp case's top HDD docking station, and it does better than expected at both (allows drive hot swapping without issues). Data transfer speeds are just as expected. Totally recom...
Publié originalement sur Startech
P
PCJohn
Hace 5 años
Trying to get this card working in a Dell Optiplex 3060 box. The motherboard has 3 PCIe x1 slots and 1 x16 slot. The manual stated that it will work in an x16 slot, but after installing the card and booting, the Dell logo pops up and just sits there. It has been like this for a hour and I cannot ...
Publié originalement sur Startech
n
neilg
Hace 2 años
Firstly I suggest you disconnect all other SATA drives on first install as I suffered a corruption on my system boot SSD disk following installation of the card. It seems very unlikely this was an unlucky coincidence. I've not seen a CTRL-M during any boot though did not exhaustively adjust PC BIOS...
Publié originalement sur Startech
N
Nick0422
Hace 8 años
I had to do very little to get this working. Installed in a Linux server, booted into the card BIOS, configured the RAID and done. It presented the drive to the OS as configured, and throughput was better than I expected (first time using a StarTech controller, so I WAS apprehensive) given the lis...
Publié originalement sur Startech
g
gregp6
Hace 5 años
I have bought 6 of these and used them for SuSe Linux Enterprise and OS/2 as the boot drive device using raid 1. They all have worked without any problems. The throughput is good but not as fast as not having a raid. I bought a backup controller that can replace an existing one if needed. Easy to co...
Publié originalement sur Startech
Avis vérifié
Notre label « avis vérifié » garantit que cet avis appartient à l'utilisateur qui a acheté le produit sur notre site web. Nous vérifions l'authenticité des achats et des avis correspondants afin de garantir que les avis ainsi étiquetés sont exacts et fiables.
Charger plus d'avis

Questions et réponses

Total 1 questions
  • Plus récents
  • Plus anciennes
  • Moins de réponses
A
Albaricoquero
Hace 5 años
Comment le raid serait-il configuré ? Y a-t-il une interface, est-ce qu'il y a un interrupteur... ?
Traduit · 
I
InformaticaJV
hace 2 años
Meilleure réponse

Albaricoquero Je n'ai pas configuré le raid, je le fais autrement, j'ai mis cette carte plus les 4 satas dont dispose le PC pour faire une armoire à disques et chaque jour de la semaine un disque différent démarre, je fais la gestion du démarrage avec un Arduino, c'est un système économique et il fonctionne très bien.

Traduit ·